60mm Continuous Potentiometer Sensor

60mm Continuous Potentiometer Sensor

Slide potentiometer is similar to the volume adjustment which is often used to adjust parameter. Its slide distance is named trip. 60 trip stands for 60mm, whitch is the most commonly used size of a stroke. This slide potentiometer is 60 trip:

The use of potentiometers is the same with other electronic building blocks.
Connect it to an analog input interfaces such as the A5 through common sensor
cable or analog sensor cable.

Connect the GND,VCC,Output of this item with the GND,VCC,Analog In of Arduino

With Arduino you can read its value, as the following :

Arduino Sample Code-1 :

int sensorPin = 5;
int value = 0;

void setup() {
  Serial.begin(9600);
}

void loop() {
  value = analogRead(sensorPin);
  Serial.println(value, DEC);
}


Arduino Sample Code-2 :

void setup()
{
  Serial.begin(9600); //Set serial baud rate to 9600 bps
}
void loop()
{
int val;
val=analogRead(0);//Read slider value from analog 0
Serial.println(val,DEC);//Print the value to serial port
delay(100);
}

So when the slider moving at different locations, the value Arduino read will be change continuously between 0-1023.

mini sound sensor

allen sound sensor

temperature sensor usb

60mm Continuous Potentiometer Sensor Images